This comprehensive guide explains each stage of rubber processing, from mastication and mixing to molding and vulcanization. It also details finishing processes like trimming and cryogenic deflashing for precision components such as seals and O-rings. With insights into the science and technology of elastomer manufacturing, this article helps readers understand how raw rubber is transformed into high-performance products.

In today’s fast-evolving automotive industry, one of the key areas of focus for manufacturers is enhancing the driving experience. A critical aspect of this is improving cabin comfort, and one of the most effective ways to do this is through acoustic insulation.

When it comes to modern driving, comfort is as important as performance. While a car’s engine, design, and handling are often the focal points of automotive engineering, one factor that increasingly influences the overall driving experience is the level of noise within the cabin.

In today’s automotive world, comfort plays a central role in the overall driving experience. Alongside the performance of a vehicle, reducing unwanted noise has become a priority for both manufacturers and consumers.

In recent years, reducing noise and enhancing comfort have become significant priorities for car manufacturers. A quieter cabin improves the overall driving experience, reduces driver fatigue, and creates a more relaxing environment for passengers.

In today's fast-paced world, driving a car is not just about getting from one place to another. It’s also about comfort, relaxation, and an overall enjoyable experience. One of the key factors that contribute to a comfortable driving experience is the level of noise inside the vehicle.

Ethylene Propylene Diene Monomer (EPDM) rubber extrusion is a critical process in the manufacturing of sealing and insulation products for various industries. Understanding the intricacies of this process is essential for factories, channel partners, and distributors who aim to deliver high-quality rubber products to the market. This article delves into the comprehensive process of EPDM rubber extrusion, highlighting its significance, methodologies, and applications in modern industrial contexts. By exploring the nuances of this process, stakeholders can better appreciate the value of Rubber Extrusion in delivering versatile solutions for both automotive and industrial applications.

This article provides a comprehensive overview of the EPDM (Ethylene Propylene Diene Monomer) seal production process. It covers each stage in detail, including raw material selection and preparation, mixing and compounding, compression molding, vulcanization, post-processing, and rigorous quality control. The guide highlights the methods used to ensure high-quality, durable, and reliable EPDM seals suitable for extreme temperature applications ranging from -50°C to 150°C.

Liquid nitrogen deflashing of O-rings is a cryogenic finishing technique that uses extreme low temperatures (-196°C) to embrittle and remove flash from rubber seals. By lowering the rubber below its glass transition temperature, the flash becomes brittle and is easily removed through tumbling or shot blasting. This process provides cleaner edges, improved surface finishes, and precise tolerance control compared to traditional trimming. With high efficiency and cost-effectiveness, liquid nitrogen deflashing is widely adopted in rubber seal manufacturing to deliver superior quality O-rings at large production volumes.

Key Properties of EPDM Sealing RingsSealing components are essential in both daily life and industrial applications. They not only prevent fluid or gas leakage but also ensure the long-term reliability of equipment. Among various sealing materials, EPDM (Ethylene Propylene Diene Monomer) stands out

Don't let sharp edges compromise your wiring harness. This guide explores how rubber grommets prevent abrasion, dampen vibration, and ensure electrical integrity. Learn about selecting the right materials (EPDM, Silicone) and installation techniques from Fuqiang's engineering experts.

Choosing between NBR vs EPDM is a critical decision in rubber component design. Although both are synthetic rubbers, they are engineered for very different environments. This article compares the properties, temperature limits, and typical applications of NBR and EPDM, providing clear guidance on material selection to prevent seal failure and ensure long-term performance.

Rubber grommets play a critical role in protecting wiring systems from abrasion, vibration, and environmental exposure. This article explains what rubber grommets are, their key benefits, common material options, and proper installation methods. Typical automotive and electrical applications are also discussed, highlighting how custom rubber grommets improve safety and extend the service life of wiring harnesses.

Silicone rubber parts are widely used in applications requiring extreme temperature resistance, flexibility, and long-term stability. This article introduces the composition and key benefits of silicone rubber, compares it with other rubber materials, and outlines how to select the right grade based on temperature and regulatory requirements. Common applications in automotive, electronics, and medical industries are also discussed.

EPDM rubber is widely recognized for its outstanding resistance to weather, heat, ozone, and aging, making it an ideal material for outdoor and automotive applications. This article explains what EPDM rubber is, its key benefits, technical specifications, and common applications. It also provides guidance on selecting the right EPDM rubber compound for long-term sealing performance in demanding environments.

The Manufacturing Process of Silicone Foam: From Raw Materials to Finished ProductSilicone foam, known for its exceptional properties such as high-temperature resistance, compressibility, and cushioning, finds wide applications in various industries. The production of silicone foam involves a carefu