Publish Time: 2026-09-20 Origin: Site
Ordinary polymer insulation can lose mechanical integrity during severe battery thermal runaway, potentially exposing adjacent cells, busbars or enclosure components to heat and flame.
Ceramifiable silicone addresses this problem by transforming under severe heat into a more ceramic-like protective residue. Before a thermal event, it can provide the flexibility and processability associated with silicone; under intense heat, the material is formulated to form a protective inorganic structure that helps maintain a barrier.
This makes ceramic silicone rubber and ceramifiable silicone tape particularly interesting for EV battery fire protection where flexibility during assembly and barrier retention during extreme heat are both required.
If an insulation layer simply burns away or loses integrity, heat and flame can gain a more direct path toward neighboring battery components.
Ceramifiable silicone is formulated to create a protective ceramic-like layer when exposed to sufficiently severe heat. WACKER has described battery fire-protection development using silicone rubber blends applied inside battery housings that ceramify when exposed to heat.[1]
The important distinction is that ceramification is not the same as ordinary flame retardancy. A flame-retardant polymer is designed to limit combustion behavior; a ceramifiable system is additionally engineered to form a more coherent protective residue during extreme thermal exposure.
Condition | Material Role | Battery Design Value |
|---|---|---|
Normal Operation | Flexible insulation or cushioning | Assembly and tolerance management |
Cell Swelling | Mechanical accommodation | Maintains controlled interfaces where designed |
Severe Heat | Ceramic-forming barrier | Helps preserve thermal/fire separation |
Using ceramifiable silicone only as a generic sheet can waste its ability to solve different mechanical and thermal problems around the pack.
Match the material format to the location. Potential applications include cell-to-cell pads, module boundaries, pack-cover protection, fire-compartment seals and insulation around selected electrical components.
Saint-Gobain lists ceramifiable silicone rubber and sponge products for thermal-runaway applications, including cell-to-cell TRP pads, top-cover protection and fire-compartment sealing.[2]
Ceramifiable silicone tape can also be useful where a conformable insulation format is required, but tape, sheet, sponge and molded silicone should not be assumed to have identical fire behavior.
Calling any fire-resistant silicone a complete “thermal runaway solution” can create a dangerous gap between material testing and pack-level performance.
Treat ceramifiable silicone as one element in a system-level propagation strategy. Barrier location, thickness, vent direction, cell spacing, cooling structures and enclosure design still matter.
Thermal runaway can expose materials to high temperature, pressure, flame and ejected particles. UL Solutions therefore evaluates battery enclosure materials under combined thermal and mechanical stresses rather than relying only on a conventional flammability rating.[3]
Choosing a material because its datasheet says “ceramic forming” does not prove that it will survive your battery's actual failure scenario.
Review the finished material at the required thickness and compression condition. Check dielectric properties, compression behavior, adhesion if applicable, thermal exposure, ceramic residue integrity and compatibility with the surrounding battery components.
Need a Custom Ceramifiable Battery Insulation Part?
Send Fuqiang your battery drawing, material thickness, cell or module location, compression requirement and die-cut geometry. Our engineering team can review sheet, pad or tape-format options and prepare samples for validation.
It is a silicone-based material formulated to develop a ceramic-like protective structure when exposed to severe heat or fire.
No. Flame retardancy describes combustion behavior, while ceramification describes the material's ability to form a protective ceramic-like residue under severe thermal exposure.
Applications can include cell barriers, module insulation, pack-cover protection, fire-compartment seals and other areas requiring flexible insulation before a thermal event and improved barrier retention during heat exposure.
It can provide conformable fire-resistant electrical or thermal insulation around geometries where a flexible tape format is more practical than a rigid sheet.
No. It does not prevent the initiating cell's electrochemical failure. Its purpose is to help manage heat and fire exposure and reduce propagation risk when integrated into a properly engineered battery system.
A 15-Year Automotive Wire Harness and Battery Insulation Perspective
After 15 years working with automotive electrical insulation and wire harness systems, I view ceramifiable silicone as valuable because it can serve one purpose during normal operation and another during extreme heat. The key is validating the actual finished part rather than relying on the words “ceramic forming” in a material description.
[1] WACKER — Silicone Materials and Ceramifying Battery Fire Protection
[2] Saint-Gobain — Ceramifiable Silicone EV Battery Fire Protection
[3] UL Solutions — Battery Enclosure Material Screening Under UL 2596